Pannoramic SCAN 150 1.15 User’s Guide
4 Software Description
The Routine work tab panel provides the following basic digitization functions:
To insert and remove slides
•
In Automatic mode a preloaded magazine has to be placed into the main unit. This magazine
is the first one, irrespectively of the total number of magazines (1-6) to be loaded.
The
button is active if there is no magazine loaded in the input feed. Click this button
to load the magazine.
•
If you do not want to load all the slides, you can specify the first and last slide to be loaded in
the
Scan Range
by entering the appropriate slide numbers in the selection boxes of
First slide
and
Last slide
.
•
To move all magazines to the output stack, click
. You can save time if you
remove all magazines from the input stack before you click this button.
You also find the
button on this tab, that you can start scanning with, but it is
recommended to go through all the settings before clicking it.
Scan Range
You can select a range of slides to be scanned here by entering the first and last slides in the
selection boxes.
To administer profiles
, use the
Scan Profiles
field.
•
The current profile name is displayed at the bottom left corner of the screen.
•
To save the current profile, click
Save
.
•
To select an existing profile from the selection menu, click
Load
.
•
You can delete the current profile by clicking
Delete
.
To access the Scan Options window, click
.
Note:
These settings are only applicable if you do not use profiles. If you use
profiles, the settings stored in them are used. The used profile name is
indicated at the bottom left of the main window.
For more information, see section
4.5.2 Scan Options window
.
2012. March 13.
3DHISTECH Ltd.
92
(
132
)
