3D Corporation ProJet 5000, Manual

Page: 10 / 94

This symbol designates the accompanying texts or figures as either a or a . CAUTION WARNING
Caution: Indicates something may happen that could cause loss of data, damage to equipment, or personal injury.
WARNING:Indicates a hazard to both equipment and personnel that may be in the immediate area.
This symbol is used to warn of the presence of potentially High voltage electricity is accessible in the HAZARDOUS VOLTAGE.
vicinity of this sign or behind the access panel. High voltage can cause severe burns or death. Access panels are for service only
and should be opened only by certified service personnel or trained maintenance personnel.
is accessible in the vicinity of this sign or behind the panel. Radiation can cause eye injury. Access panels Invisible UV radiation
are for service only and should be opened only by certified service personnel. Use UV radiation eye and skin protection when
servicing with "bypass engaged."
is accessible in the vicinity of this sign or behind the access panel. Avoid contact. Hot surfaces can cause severe A hot surface
burns. Access panels are for service only and should be opened only by certified service personnel or trained maintenance
personnel.
: Indicates that skin or eye irritation could result while exposed to a chemical composition. Harmful Irritant Warning
When accompanied by the word the text and symbol are meant to call attention to a practice whose implementation can "NOTE",
save time or prevent subsequent inconvenience to the user.
03.0 Safety Guidelines
Before using the printer, your company should have a safety program in place. The safety program should:
Label and point out hazardous equipment, materials, and procedures.
Explain what to do in case of an emergency.
Provide information about hazards of equipment and materials in the form of Material Safety Data Sheets (MSDSs). The MSDSs are
provided with all materials supplied by 3D Systems.
3.1 General
3.2 Electrical
3.3 Ultraviolet (UV) Light
3.1 General
The printer is designed with built in safety features. Improper use can lead to malfunctions that can cause injury to personnel. To prevent unsafe
operation, the printer will automatically shut down if unsafe conditions are detected.
Follow these safety guidelines when operating the printer:
Read and follow all printer instructions.
Follow all safety rules and heed all cautions and warnings in this guide.
Do not attempt to open chamber door while build in progress.
Do not use any material without reviewing the Material Safety Data Sheets (MSDS).
Dress power and communication cables behind printer to prevent tripping.
Do not attempt to access, service, or adjust printer components. Do not attempt to perform any maintenance procedures unless
specifically trained to do so.
Do not operate without all safetys and guards in place and functional.
Operators are trained to operate system and perform all necessary tasks to create a part.
Certified service personnel are those who completed the 3D Systems service training package and were certified to perform service tasks.
Certification may occur at different levels, and service providers should only perform tasks they are authorized and certified to complete.
Do not ignore warning signs posted during printer service operations.
If an error message appears on the printer's LCD refer to Section within this guide before resuming operation. 10.0 Error Messages