Exposure control
The printer has a variety of built-in engineering controls which are designed to prevent operator exposure. Do not try to change or disable these
controls.
Appropriate hygienic practices should be followed, including washing with soap and water before meals, breaks, smoking, applying cosmetics,
using toilet facilities, and after work.
4.3 Material Handling
Emergency (MSDS)
Chemtrec USA
; Europe
(800) 424-9300
+1-703-527-3887
Packaging Inspection
VisiJet® materials are supplied in bottles. These bottles are packaged with cardboard packing material inside the shipping carton. Upon receipt of
material shipments, inspect cardboard carton exterior for signs of damage and leakage. If leakage is observed, DO NOT open carton, contact 3D
Systems'
Building
If uncured material is observed on the part or platform after build, this is an abnormal condition, and is an indication the printer requires servicing
by 3D Systems. Assume any liquid or paste-like material is part material. Do not directly touch uncured part material without protective gloves.
Discontinue use of the printer, pending service by a 3D Systems Technical Support Representative or your servicing reseller.
Flammability and Combustibility
Do not expose materials to heat at or above 230°F (110°C), flames, sparks, or any source of ignition. (Though the U.S. Department of
Transportation does not consider VisiJet® materials a "flammability hazard," they do classify them "combustible" based on flash points.) For more
information on VisiJet® material flash points and combustibility, see
.
VisiJet® Material Handling Guide
4.4 Personal Protection Equipment
Skin Protection: When removing and disposing of the part material bottles and waste bag, exposure to uncured part
material may occur To prevent contact, wear chemically resistant protective gloves - nitrile or neoprene gloves are
recommended. Do not use Latex gloves.
Summary of Contents for ProJet 5000
