3Com WL-603, User Manual

Page: 69 / 182

Wireless Settings 67
Connection Control This feature is used to filter the clients based on their MAC addresses.
Using this function, you can limit the access right of the wireless clients to
this Router.
Check the Enable MAC Address Filtering checkbox, the Connection
Control screen will appear.
Figure 51 Connection Control Screen
There are two options available in the Access rule for registered MAC
address field:
■
if you click Allow , this means only the MAC addresses registered here
in the list will be allowed to access the Router via wireless link.
■
if you click Deny , this means the registered MAC addresses will not be
able to access the Router via wireless link.
Use the MAC Address Filtering List to quickly copy the MAC addresses of
the current wireless clients into the list table. You can define up to 32
MAC addresses to the list.
You can click Clear to delete the current entry in the list.