20
C
HAPTER
2: I
NSTALLING
THE
B
RIDGE
Bridge Default Settings
Table 4 shows the Bridge configuration factory defaults.
Table 4
Factory Default Settings
Property
Default Setting
Device Name
3Com WWB
Device Location
None (blank)
Country
For U.S. version, United States and Canada
For non-U.S. version, set by the user
Client Mode
Support multiple wired Ethernet clients
IP Network Setting
Obtain IP address automatically
IP Address
Obtained automatically (with a DHCP server)
169.254.2.2 (without a DHCP server)
Subnet Mask
Obtained automatically (with a DHCP server)
255.255.0.0 (without a DHCP server)
Gateway IP Address
Obtained automatically (with a DHCP server)
0.0.0.0 (without a DHCP server)
Network Mode
Wireless Client (Infrastructure)
Radio Mode
Auto Select
Wireless LAN Service Area
Attach to any WLAN Service Area (ESSID) automatically
Channel Selection
Automatic Best Channel (uses access point setting)
Transmit Power
100%
Antenna Selection
Internal
Data Preamble
Long (if Network Mode is set to
Ad-Hoc
)
Same as access point setting (if Network Mode is set
to
Wireless Client [Infrastructure])
Security Setting
Open System (no security)
802.1X Authentication State
Disabled
SNMP
Enabled
Access Control List
Disabled
Administration Login Name
admin
Administration Password
None (blank)
TFTP Server IP Address
None
FTP Server IP Address
None
