3Com WL-560 User Manual Download Page 15

Page: 15 / 80

NSTALLING

THE

RIDGE

This chapter contains the information you need to install and set up the
Bridge. It covers the following topics:

■

Unpacking the Bridge

■

Observing Safety Precautions

■

Deciding Where to Place the Bridge

■

Connecting the Bridge

■

Checking the LED Indicators

■

Attaching an External Antenna

■

Determining if You Need to Configure the Bridge

■

Using the 3Com Installation CD

Unpacking the
Bridge

Make sure that you have the following items, which are included with the
Bridge:

■

Power adapter and power cord.

■

Standard Category 5 unshielded twisted pair (UTP) Ethernet cable.

■

Locking bar (used for securing a wall-mounted installation).

■

Rubber feet (four; used for a flat-surface installation).

■

3Com Installation CD.

For wall-mounting installations, you need the following items, which
are not included with the Bridge:

■

Mounting screws.

■

Plastic anchors (for drywall mounting).

To secure the Bridge using the locking bar, you need a lock (not supplied).

Summary of Contents for WL-560

















































































Search results

Summary of Contents for WL-560

Reviews:

Related manuals for WL-560

Brands by name

Popular brands

3Com WL-560, User Manual

Search results

Summary of Contents for WL-560

Reviews:

Related manuals for WL-560

Brands by name

Popular brands