42
C
HAPTER
3: C
ONFIGURING
THE
B
RIDGE
Using the 802.1X
Exception List
Use the 802.1X Exception List page to allow Ethernet clients to bypass
802.1X authentication. The default state is Disabled.
To build the 802.1X Exception List:
1
Under
System Configuration
, click
RADIUS
.
2
On the RADIUS page, click
Click here to specify MAC addresses to bypass
802.1X authentication
.
3
On the 802.1X Exception List page, click
Add
. The 802.1X Exception List
New MAC page appears.
4
In
MAC Address
, type the MAC address of the client you want to add to
the 802.1X Exception List, and then click the
Add
.
5
For each client that you want to add to the 802.1X Exception List, repeat
steps 3 and 4.
6
On the 802.1X Exception List page, click
Enable
in
802.1x Exception
State
.
Table 13
RADIUS Authentication Server Settings
Setting
Description
802.1X
Authenticator State
Enable or disable RADIUS authentication by selecting
Enable
or
Disable
.
Primary RADIUS
Server
Enter the IP address of the primary RADIUS Authentication
Server. Make sure this address matches the address set in the
RADIUS Authentication software.
Primary RADIUS Port
Enter the port number of the primary RADIUS Authentication
Server. Make sure this number matches the number set in the
RADIUS Authentication software. The default port is 1812.
Primary RADIUS
Secret
Enter the password of the primary RADIUS Authentication
Server. Make sure this password matches the password set in
the RADIUS Authentication software.
Secondary RADIUS
Server
Enter the IP address of the secondary RADIUS Authentication
Server. Make sure this address matches the address set in the
RADIUS Authentication software.
Secondary RADIUS
Port
Enter the port number of the secondary RADIUS
Authentication Server. Make sure this number matches the
number set in the RADIUS Authentication software. The
default port is 1812.
Secondary RADIUS
Secret
Enter the password of the secondary RADIUS Authentication
Server. Make sure this password matches the password set in
the RADIUS Authentication software.
