78
C
HAPTER
7: S
TANDARD
F
EATURES
■
If you have not enabled this feature code, you can send a call that is
ringing (and all subsequent calls) to your voice mailbox by pressing
Feature
+
440
.
■
To disable this feature, press
Feature
+
440
. All calls ring normally.
Transferring a Call
to Another User’s
Voice Mail
You can transfer a connected call directly to another subscriber’s voice
mail rather than that subscriber’s phone extension. The subscriber can be
located locally or at a remote site.
To transfer a call to another subscriber’s voice mail:
1
While on a call, press
Feature
+
441
.
The Display Panel shows the following prompt:
Transfer VMail Number:
2
Enter the extension of the subscriber whose mailbox will receive the call
and press
#
.
The caller hears the mailbox greeting of the target subscriber but the
subscriber’s phone does not ring.
Alternatively, you can use the following procedure:
1
While on a call, press
Transfer
.
2
Enter the transfer to another subscriber’s voice mail feature code in the
following format:
*441*<extension>
For
<extension>
, you can either enter the phone extension of the
recipient, press a speed dial button mapped to that extension, or press a
bridge line button (Basic phones do not support bridging) mapped to that
extension.
3
Press the
Transfer
button again, then hang up.
For example, extension 1001 calls extension 1000. Extension 1000 wants
to transfer the call to the voice mailbox of extension 1002. In this case,
extension 1000 performs the following steps:
Presses
Transfer
.
Enters
*441*1002
.
Presses
Transfer
.
