Terminating Calls
53
For example, the telephone in a conference room may be configured to
prevent long-distance telephone calls. You may, however, need to place a
long-distance call during a meeting. If the permissions included with the
Class of Service on your phone allow long-distance calling, you can use
the Class of Service Override feature to apply your phone features to the
conference room phone for one call only.
To activate the one-call-only Class of Service Override from any VCX
telephone:
1
Pick up the handset.
2
Press
Feature
+
433
. The Display Panel prompts you for the required
input.
3
Enter your telephone extension.
4
Enter your password and press
#
.
5
Enter the destination number as you would from your own VCX
telephone.
When you use Class of Service (CoS) Override, any reports that are
generated on the VCX system indicate that the CoS features of your own
VCX telephone were applied temporarily to the telephone on which you
made the call.
Terminating Calls
You can terminate a call (hang up) by replacing the handset. Alternatively,
depending on your phone model, you can press the
Release
button, or if
the call is on Speaker, turn the Speaker off by pressing the
Speaker
button.
Using the
Telephone Display
Panel
The Display Panel shows the current date and time, and your extension
number. It can also show features that you have enabled. For example, if
you enable the feature that forwards all incoming calls to your voice
mailbox, the Display Panel shows
Fwd Voice Mail
.
The Display Panel can also list telephone status messages, Caller ID
information (if enabled), and the number of new messages (voice, e-mail,
and fax) that you have in your mailbox.
If the Display Panel contains more than two lines of information, use the
up and down scroll buttons to navigate through the display.
