3Com V3000 ANALOG Installation Manual Download Page 17

Page: 17 / 252

BOUT

HIS

UIDE

This guide provides information and instructions for installing the NBX

Networked Telephony Solution. It is intended for authorized installation
technicians.

■

If the information in the release notes differs from the information in
this guide, follow the instructions in the release notes.

■

Release notes and all product technical manuals are available on the

NBX Resource Pack DVD

and the 3Com web site.

■

For information about monitoring, changing, and maintaining the
system, see the

NBX Administrator’s Guide

on the

NBX Resource Pack

or in the NBX NetSet interface

■

For information about using the telephones on an NBX system, see
the NBX telephone guides

and the

NBX Feature Codes Guide

on the

NBX Resource Pack

or in the NBX NetSet interface.

How to Use
This Guide

Table 1

shows where to look for specific information in this guide.

Table 1

Overview of the Guide

Description

Chapter

An overview of NBX components and licensing

Chapter 1

How to install hardware components

Chapter 2

How to install Telephones and Attendant Consoles

Chapter 3

How to install Analog Line Cards

Chapter 4

How to install Analog Terminal Cards and

Analog Terminal Adapters

Chapter 5

How to install BRI-ST Digital Line Cards

Chapter 6

How to install E1 ISDN PRI Digital Line Cards

Chapter 7

How to install T1 Digital Line Cards

Chapter 8

How to install 3Com Legacy Link Cards

Chapter 9

Summary of Contents for V3000 ANALOG





























































































































































































































































Search results

Summary of Contents for V3000 ANALOG

Reviews:

Related manuals for V3000 ANALOG

Brands by name

Popular brands

3Com V3000 ANALOG, Installation Manual

Search results

Summary of Contents for V3000 ANALOG

Reviews:

Related manuals for V3000 ANALOG

Brands by name

Popular brands