3Com V3000 ANALOG, Installation Manual

Page: 107 / 252

Connecting Cards and Devices 107
The Auto Discover process finds each port on each Analog Terminal Card
and assigns port extensions.
Connecting an
Analog Terminal
Adapter
If you are installing one or more Analog Terminal Adapters (ATA), install
them after installing chassis cards.
To install an ATA:
1 Connect the analog telephone or fax machine to the analog port on the
ATA. The analog port on a 3C10120B ATA has a picture of an analog
telephone beside it. See
Figure 24 . The analog port on a 3C10400 or the
3C10400B ATA is labeled POTS (Plain Old Telephone Service). See
Figure 25 .
The Analog Terminal Adapter may require a telephone connector for use
outside North America. Contact your supplier for more information on
country-specific requirements.
2 Connect the Ethernet port on the ATA to the LAN. The Ethernet port on a
3C10120B ATA is the connector on the far left side. On the 3C10400B
ATA, the Ethernet port is labeled LAN.
Figure 24 3C10120B ATA Connectors
Figure 25 3C10400B ATA Connectors
3 You can optionally connect a PC (or other Ethernet device) to the
Ethernet port on the ATA. The 3C10120B Ethernet port has a picture of
an NBX telephone beside it. The Ethernet port on the 3C10400B ATA is
labeled PC.
POTS LAN PC
IOIOI
24 VDC