Configuring Additional Service Providers
73
The Internet Service Provider Parameters window appears.
Figure 45
ISP Parameters Window
3
In the Name field, choose any name that you wish to associate with this ISP.
4
In the Dial Out Prefix field, if applicable, enter the number required by your
location to reach an outside line, if necessary. An example would be dialing “9”
for use with a PBX. If not required, leave this field blank.
5
(Optional) In the Call Waiting Disable Command field, enter the value you
obtained from your telephone company for disabling Call Waiting.
If you have Call Waiting enabled on your line and you do not disable Call Waiting,
then any incoming calls will disrupt your modem connection.
The
Dial Out Prefix
and
Call Waiting Disable Command
will automatically be
applied to both telephone numbers that you enter below (if you have more than
one number). If you wish to set up one telephone number that does not require a
dial out prefix, leave the Dial Out Prefix field blank and enter that prefix value as
part of the individual telephone number field itself (for example,
‘918005551000’
).
Summary of Contents for U.S. Robotics 56K Voice
