![background image](http://html1.mh-extra.com/html/3com/u-s-robotics-56k-voice/u-s-robotics-56k-voice_user-manual_3105173038.webp)
38
C
HAPTER
3: B
EFORE
Y
OU
B
EGIN
Figure 23
Microsoft TCP/IP Properties Window
9
From the Adapter drop-down list box, select the Ethernet card that is connected to
the Dual 56K LAN Modem.
10
Select
Obtain an IP Address from a DHCP Server
, unless you are setting up for
static IP addressing. If this LAN uses static IP addresses, enter the IP address and
subnet mask.
11
Click
OK
.
12
Click
Yes
to restart your PC and allow the changes to take effect.
13
Run the EZ-LAN Wizard again to optimize the settings on your workstation.
Windows 2000
To add TCP/IP to your protocols list for Windows 2000:
You may be prompted for your Windows 2000 installation disks or CD-ROM.
1
From the Control Panel, double-click
Network and Dial-up Connections
.
2
Double click
Local Area Connection
.
The Local Area Connection Status window opens.
3
Click
Properties
.
The Local Area Connection Properties window opens.
4
Click
Install.
5
Select
Protocol
and click
Add.
The Select Network Component Type dialog box opens.
6
Select
Internet Protocol (TCP/IP)
and then click
Add
.
7
Click
Close
to exit the Local Area Connection Properties window.
8
Click
Close
again to exit the Local Area Connection Status window.
You may be prompted to re-boot your workstation.
9
Run the EZ-LAN Wizard again to optimize the settings on your workstation.
Summary of Contents for U.S. Robotics 56K Voice
