![background image](http://html1.mh-extra.com/html/3com/u-s-robotics-56k-voice/u-s-robotics-56k-voice_user-manual_3105173037.webp)
Adding TCP/IP to Your Protocols List
37
The following message appears.
Figure 21
DHCP Message Box
5
Select
Yes
, unless you know that you will be setting up the LAN Modem for use on
a static network. By selecting Yes, you are setting up the LAN Modem to act as
your DHCP server.
If you will be connecting to a static network, select No.
You are prompted to copy files. You may be prompted to insert your CD ROM.
6
If the necessary files already exist on your hard drive, click
Continue
. Otherwise
insert the Windows NT 4.0 CD ROM and click
Continue
.
If you have Remote Access Service (RAS) installed on your PC, after the
appropriate files are copied to your PC, a message box asks whether or not you
would like TCP/IP installed for RAS. If you select
Yes
, you must select the device
you want to access remotely and then click
Close
.
7
After the appropriate files are copied to your PC, you will see TCP/IP Protocol listed
in the Network Protocols group box, as shown in Figure 22.
Figure 22
Network Protocols Window
8
Click
Close.
The Microsoft TCP/IP Properties window appears, as shown in Figure 23.
Summary of Contents for U.S. Robotics 56K Voice
