![background image](http://html1.mh-extra.com/html/3com/u-s-robotics-56k-voice/u-s-robotics-56k-voice_user-manual_3105173057.webp)
Connecting an External Hub to the Dual 56K LAN Modem
57
To connect the hub to the Dual 56K LAN Modem:
1
Insert one end of the Ethernet cable into any available LAN port on the back of the
LAN Modem, as shown in Figure 36.
Figure 36
10BASE-T Hub-to-LAN Modem Connection
2
Insert the opposite end of the cable into one of the ports on the external Ethernet
hub.
3
If you are using an OfficeConnect Ethernet Hub 8, insert the opposite end of the
Ethernet cable into port 8, and then set the MDI/MDIX switch to MDI (that is,
pressed in). Make sure that the LED associated with that Ethernet port is lit. If it is
not, try changing the MDI/MDIX switch setting.
You can now connect any additional computers and/or printers to the remaining
LAN ports.
LAN
1
3
2
4
LIN
E 1
P
HO
NE
1 L
INE
2 P
HO
NE
2
10-30 VDC
0¥ 8A MAX
RESET
3
OfficeConnect
Dual 56K LAN Modem
OfficeConnect
Ethernet Hub 8
Ethernet cable
10-18 VDC
0¥ 8A MAX
MDI/M
DIX
8 7 6 5 4 3 2 1
1
2
Summary of Contents for U.S. Robotics 56K Voice
