Configuring MAC Address Table Management
135
Configuring a MAC
Address Entry
You can add, modify, or remove a MAC address entry, remove all MAC address
entries concerning a specific port, or remove specific type of MAC address entries
(dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
Adding a MAC address entry in system view
c
CAUTION:
■
When you add a MAC address entry, the port specified by the
interface
argument must belong to the VLAN specified by the
vlan
argument in the
command. Otherwise, the entry will not be added.
■
If the VLAN specified by the
vlan
argument is a dynamic VLAN, after a static
MAC address is added, it will become a static VLAN.
Adding a MAC address entry in Ethernet port view
c
CAUTION:
■
When you add a MAC address entry, the current port must belong to the VLAN
specified by the
vlan
argument in the command. Otherwise, the entry will not
be added.
■
If the VLAN specified by the
vlan
argument is a dynamic VLAN, after a static
MAC address is added, it will become a static VLAN.
Setting the Aging Time
of MAC Address Entries
Setting aging time properly helps effective utilization of MAC address aging. The
aging time that is too long or too short affects the performance of the switch.
■
If the aging time is too long, excessive invalid MAC address entries maintained
by the switch may fill up the MAC address table. This prevents the MAC
address table from being updated with network changes in time.
■
If the aging time is too short, the switch may remove valid MAC address
entries. This decreases the forwarding performance of the switch.
Table 90
Add a MAC address entry in system view
Operation
Command
Description
Enter system view
system-view
-
Add a MAC address entry
mac-address
{
static
|
dynamic
|
blackhole
}
mac
-
address
interface
interface
-
type
interface-number
vlan
vlan
-
id
Required
Table 91
Add a MAC address entry in Ethernet port view
Operation
Command
Description
Enter system view
system-view
-
Enter Ethernet port view
interface
interface-type
interface-number
-
Add a MAC address entry
mac-address
{
static
|
dynamic
|
blackhole
}
mac-address
vlan
vlan-id
Required
Summary of Contents for Switch 4210 9-Port
