3Com Switch 4210 9-Port, Configuration Manual

Page: 253 / 567

RADIUS Configuration Task List 251
can access after login is determined by the privilege level of the user. For SSH
users using RSA shared key for authentication, the commands they can access
are determined by the levels set on their user interfaces.
■
If the configured authentication method is none or password authentication,
the command level that a user can access after login is determined by the level
of the user interface.
■
If the clients connected to a port have different authorization VLANs, only the
first client passing the MAC address authentication can be assigned with an
authorization VLAN. The switch will not assign authorization VLANs for
subsequent users passing MAC address authentication. In this case, you are
recommended to connect only one MAC address authentication user or
multiple users with the same authorization VLAN to a port.
■
For local RADIUS authentication or local authentication to take effect, the
VLAN assignment mode must be set to string after you specify authorization
VLANs for local users.
Cutting Down User
Connections Forcibly
n
You can use the display connection command to view the connections of Telnet
users, but you cannot use the cut connection command to cut down their
connections.
RADIUS Configuration
Task List
3Com’s Ethernet switches can function not only as RADIUS clients but also as local
RADIUS servers.
Table 187 Cut down user connections forcibly
Operation Command Remarks
Enter system view system-view -
Cut down user connections
forcibly cut connection { all |
access-type { dot1x |
mac-authentication } |
domain isp-name | interface
interface-type
interface-number
| ip
ip-address | mac mac-address
| radius-scheme
radius-scheme-name | vlan
vlan-id | ucibindex ucib-index
| user-name user-name }
Required