3Com Switch 4210 9-Port, Configuration Manual

Page: 486 / 567

484 C
HAPTER
42: B
ASIC
S
YSTEM
C
ONFIGURATION AND
D
EBUGGING
Displaying the System
Status
You can use the following display commands to check the status and
configuration information about the system. For information about protocols and
ports, and the associated
display commands, refer to relevant sections.
Debugging the
System
Enabling/Disabling
System Debugging The device provides various debugging functions. For the majority of protocols and
features supported, the system provides corresponding debugging information to
help users diagnose errors.
The following two switches control the display of debugging information:
■
Protocol debugging switch, which controls protocol-specific debugging
information
■
Screen output switch, which controls whether to display the debugging
information on a certain screen.
Figure 170 illustrates the relationship between the protocol debugging switch and
the screen output switch. Assume that the device can output debugging
information to module 1, 2 and 3. Only when both are turned on can debugging
information be output on a terminal.
Table 355 System information display commands
Operation Command Description
Display the current date and
time of the system display clock You can execute the display
commands in any view
Display the version of the
system display version
Display the information about
users logging onto the switch display users [ all ]