Using the List Card Menu
69
Figure 59
Configuration Management Menu
Using the List Card
Menu
The List Card menu, shown in Figure 60, lists the shelf and all installed interfaces.
To open the List Card menu:
1
From the main menu select
[2] Configuration Management
.
2
From the Configuration Management menu, select
[1] Manage Card
.
Select
[0] Shelf
from the List Card menu to view configuration information for the
shelf. The Shelf Configuration screen is a read-only screen that displays the
Hardware Revision
and
Serial Number
.
The remaining options (1 and above) on the List Card menu open menus that
allow you to configure specific modules and ports. The following sections tell you
how to perform the specific configurations available from the List Card menu.
If you install the optional four-port IMA expansion card in slot 9, the software
shows an eight-port T1/E1 UNI IMA card in slot 3. For slot 3 on the List Card menu,
both columns (Actual Card Type and Configured Card Type) list eight-port IMA. For
slot 9, the Actual Card Type column lists four-port IMA, and the Configured Card
Type column is blank.