Performing Initial System Configuration
53
3
Enter the following information (by selecting the appropriate options and
responding to the prompts that appear at the bottom of the screen) to configure
the trap client:
IP Address
— The IP address of the network management station to which you
want the PathBuilder S330/S310 switch to send traps.
Subnet Mask
— The subnet mask for the network management station to which
you want the PathBuilder S330/S310 switch to send traps.
Port Number
— The system-defined port number. You should not modify this
number. (SNMP/UDP).
4
Select
[4] Previous Menu
to return to the Trap Client Configuration menu.
5
Select
[5] Previous Menu
to return to the Manage IP Network Configuration
menu.
Configuring the Default Gateway
The default gateway routes IP data to non-local networks (Telnet sessions from
different subnetworks). To configure the default gateway:
1
From the Manage IP Network Configuration menu, select
[3] Default Gateway
Configuration
to open the Default Gateway Configuration menu, shown in
Figure 50.
Figure 50
Default Gateway Configuration Menu
2
Select
[1] Set IP Address
. The system prompts you to enter an IP address.
3
Enter the IP address of the router which you want to configure as the default
gateway.
4
Select
[2] Previous Menu
to return to the Manage IP Network Configuration
menu.
5
Select
[4] Previous Menu
to return to the System Administration menu.
