3Com S330 Reference Manual Download Page 189

Page: 189 / 300

Using Loopbacks

179

Figure 152

OC3/STM-1 Loopback Menu

Select

[1] Set Loopback

. A prompt listing the loopback choices for the selected

port appears at the bottom of the screen.

Enter the number corresponding to the type of loopback you want to configure.

The following subsections describe the available loopbacks for each of the
PathBuilder S330 interfaces.

T1/E1 UNI with IMA

Loopbacks

The following loopbacks are available for the T1/E1 UNI with IMA interface:

Network Line

— Loops the T1/E1 received data back on the output side after the

digital data has been recovered.

Local Card

— Loops the transmit T1/E1 output on the receive side; the

transmitted data will continue to go on the output.

Network Card

— Loops the T1/E1 received payload back toward the line output.

Summary of Contents for S330













































































































































































































































































































Search results

Summary of Contents for S330

Reviews:

3Com S330, Reference Manual, Page: 189 / 300

Search results

Summary of Contents for S330

Reviews: