3Com OfficeConnect WX1200, Reference Manual

Page: 478 / 520

478 C
HAPTER
18: O
PTIMIZING A
N
ETWORK
P
LAN
5 You can choose to import measurements from the network, a site survey
file, or both:
a If you want to use RF neighborhood information imported from a
MAP in the network, click
Yes next to Network.
b If you want to import measurements from a site survey file, click Yes
next to File, and in the File Format listbox, select Ekahau . Then click
Choose to navigate to the csv file that contains the RF measurement
data.
6 In the Map Name field, specify the map name.
The map name must match the name specified in the site survey work
order, and must be the same map name used in the site survey tool.
7 Click Next .
The import progress is displayed. When the import is done, check the
Total valid RF measurements found line in the progress messages.
„
If the number is greater than 0, 3WXM successfully imported
measurements.
„
If the number is 0, no measurements were imported. Try the import
again and verify that the map name is correct.