3Com OfficeConnect WX1200, Reference Manual

Page: 322 / 520

322 C
HAPTER
8: C
ONFIGURING
A
UTHENTICATION
, A
UTHORIZATION
,
AND
A
CCOUNTING
P
ARAMETERS
7 To enable this accounting rule for the SSID, select Enabled .
By default, accounting rules you configure in 3WXM are disabled, which
means 3WXM does not add the rules to the switch’s configuration.
8 Select one of the following record options:
„
Select Start-Stop to specify that records are sent at the start of a
session and the end of a session.
„
Select Stop-Only to specify that records are sent only at the end of a
session.
9 Select the accounting method(s) in the Available RADIUS Server Groups
list and click
Add .
The options and processing are the same as those for authentication
methods. (See step 5.)
10 Click Finish .
Creating an Access
Rule for Telnet or SSH
Access
To create an access rule for Telnet or SSH access:
1 Access the Create Admin User wizard:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to AAA.
d Select Admin Access Rules .
e In the Task List panel, select Admin Access .
2 Type the userglob that is allowed to access the switch through Telnet or
SSH.
3 Click Next .
4 If the authentication rule is disabled, select Enabled .
When a rule is disabled, 3WXM does not add it to the switch’s
configuration.
5 Select the authentication method(s) in the Available RADIUS Server
Groups list and click
Add .
An authentication method specifies where the switch will look for user
information to authenticate users. You can select a RADIUS server group,
LOCAL (the switch’s local user database), or both.