3Com OfficeConnect 3CR414492, Getting Started Manual

Page: 16 / 66

1-8 C
HAPTER
1: G
ETTING
S
TARTED
A remote site profile named “bridge” is set up to bridge
all traffic with RFC 1483 encapsulation on the specified
VPI/VCI.
Spanning Tree Disabled
Administrative Login profile: User Name: root and
Password: !root
Setting Unconfigured Mode
Use this versatile mode if you want to boot the unit
without any configuration. You can manually configure the
unit to operate in any way, including Bridge Mode or DHCP
Smart Mode.
1 Set all switches to OFF to boot your unit in Unconfigured
Mode.
2 You must set all of the configuration parameters. This
allows you complete flexibility with your configuration.
DIP Switch Settings
The Dual Inline Package (DIP) switch settings initialize the
OCR 812 with pre-configured parameters. The
corresponding Boot Mode options are as follows:
Table 1-2 DIP Settings
on position = set ADSL to ANSI mode
off position = set ADSL to Multimode
Your service provider gives you the VPI/VCI settings, but if
you want to change them, go to the Remote Site
1 2 3 4 Mode
off on off off DHCP Smart Mode
off off on off Bridge Mode, VPI=0,
VCI=35 (default settings)
off off off on Bridge Mode,
VPI=8, VCI=35
off off off off Default Unconfigured
Mode
on off off off ANSI
off off off off Multimode