3Com NBX, Installation Manual

Page: 116 / 248

116 C
HAPTER
2: I
NSTALLING
S
YSTEM
H
ARDWARE
C
OMPONENTS
Reassigning
Extensions and
Setting Line Card Port
Options
For this procedure, you need the list of line card port MAC addresses that
were created when you installed the line cards.
To reassign extensions and set line card port options:
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 Click PSTN Gateway Configuration > Analog Line Cards .
3 Click the lowest extension to open the Modify screen.
4 Edit the line card port fields as needed. Click the Help button for
information about each field.
5 After you have made all of your changes for the current Line Card port,
click
Apply to enable the changes and review them.
6 Click OK to exit the dialog box and return to the Line Cards tab.
7 Repeat this procedure for each line card port.
Example:
During the Auto Discover process, the NBX system may assign extensions
to Line Card ports as shown in
Table 25 .
Typically, you want to have the lowest extension number associated with
the first port, the next highest extension number associated with the
second port, and so on.
To reassign the extension numbers:
1 Record the extensions and either the MAC addresses or port numbers for
the four Line Card ports.
2 In the NBX NetSet Menu window, click Reports > Device List .
Table 25 Examples of Line Card Addresses
Analog Line Card (3C10114) Analog Line Card (3C10114C)
MAC Address Extension MAC Address Extension
00:e0:bb:03:8d:c8 7260 00:e0:bb:03:8d:cc(1) 7260
00:e0:bb:03:8d:c9 7261 00:e0:bb:03:8d:cc(2) 7261
00:e0:bb:03:8d:ca 7259 00:e0:bb:03:8d:cc(3) 7259
00:e0:bb:03:8d:cb 7258 00:e0:bb:03:8d:cc(4) 7258