4-4
C
HAPTER
4: S
OFTWARE
I
NSTALLATION
AND
C
ONFIGURATION
U
NDER
W
INDOWS
3.
X
Removing NIC Software
EtherDisk
diskette 2
includes an uninstallation program to remove
the 3C509B NIC software.
To run the uninstallation program, at the DOS prompt, Enter:
un3c509.exe
The NIC software is removed from your PC.
Configuring the NIC
This section describes how to configure the 3C509B NIC after you
install it in your PC. If only one 3C509B NIC is installed and you
are running Novell NetWare, use the AutoLink program to
configure the NIC and load the appropriate driver, as described
earlier in this chapter.
To configure the 3C509B NIC, follow these steps:
1
Install the NIC (see Chapter 1) and the network driver
(earlier in this chapter).
2
Reboot to DOS.
3
Insert
EtherDisk
diskette 2 in drive A.
4
Run the installation program. Enter:
a:install
The main menu is displayed, as shown in Figure 4-1.
5
Select
Configuration and Diagnostic Program
.
If you have more than one NIC installed in the PC, select the NIC
you want to configure. Tab to the
Select
button and press Enter.
6
Select
Configure NIC
and press Enter.
The NIC Configuration screen is displayed, as shown in Figure 4-2.
Windows 95 NDIS 2 16-bit
network driver
W95NDIS2.TXT
ELNK3.DOS
NetWare Client 32
CLIENT32.TXT
3C5X9.LAN
NetWare 3.12 Server
NETWARE.411
3C5X9.LAN
NetWare 4 Server
NETWARE.411
3C5X9.LAN
NetWare OS/2
NWOS2ODI.TXT
3C5X9.SYS
Packet driver NOSs
PACKET.TXT
3C5X9PD.COM
Table 4-2
Network Driver Text File Names (continued)
Network
Operating System
Text File Name
Network Driver Name
Book Page 4 Friday, June 11, 1999 3:02 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
