36
ATM I
NTERFACE
M
ODULE
Q
UICK
S
TART
G
UIDE
ATM Switch Fabric Module Monitor Software Download
To
download the Monitor Software for the ATM Switch Fabric Module, use
the following procedure.
1
Log into the CoreBuilder 9000 Enterprise ATM Switch Local Management
Access (LMA) See “Starting Up” on page 38 for complete log in
instructions.
2
Reboot the CoreBuilder 9000 by entering the command,
1 7
at the
Main Menu prompt.
3
Prepare the CoreBuilder 9000 for download
4
Wait until the following display appears:
5
Press the "Shift" key and do not release it.
6
While holding down the "Shift" key, press the "U" key 3 to 4 times.
7
Wait until the "AFTER DOWNLOAD (go to MON)" message is displayed,
then change the baud rate to 57600.
8
Press "Enter" twice.
9
After the "=>" prompt is displayed type,
dm 60
and press "Enter".
10
Set the modem type to "XMODEM".
11
Download the "Cb9mon.cel" file.
12
After the "=>" prompt is displayed, change the baud rate to 9600.
13
Reboot the CoreBuilder 9000 by switching the power off and then back
on.
If you have rebooted the CoreBuilder 9000 and still need to download
another software unit, repeat the procedure from step 1 for the next
software unit. After the upgrade is complete, the reboot process could
take up to 5 minutes.
Bootstrap V1.5 Mar 18 1998
CB9000 3Com NCD
=====================
