22
ATM I
NTERFACE
M
ODULE
Q
UICK
S
TART
G
UIDE
Figure 19
Removing the Screws and Washers
3
Hold the OC-12/STM-4 card and gently lift upwards until the connectors
disengage (Figure 20).
Figure 20
Disengaging the Connectors
4
Raise the back of the OC-12/STM-4 daughter card to a 20° angle, and
remove the card from the ATM Interface Carrier Module in a backwards
direction (Figure 20).
5
Replace the protective plate as follows:
a
Insert the plate into the ATM Interface Carrier Module from the back,
taking care to cover the cutout completely.
b
Replace the three countersink screws that are included with the plate.
