19
2
Insert the protective plug into the left cutout from the back of the ATM
Interface Carrier Module (Figure 14) until the 3 front holes of the
daughter card are aligned with the 3 holes in the faceplate of the ATM
Carrier Module.
Figure 14
Inserting the OC-12/STM-4 Card into the Cutouts
3
Lower the OC-12/STM-4 card until it rests on the spacer.
4
Look from the side of the ATM Interface Carrier Module and align the
beige connector of the ATM Interface Carrier Module with the beige
connector of the OC-12/STM-4 card.
5
Place your fingers on the daughter card directly over the beige connector
and press down to fasten the connectors together (Figure 15). A click is
heard when the connectors engage.
Figure 15
Fastening the Beige Connectors
