3Com 4800G Series Configuration Manual Download

Page: 718 / 1246

718

HAPTER

50: 802.1

ONFIGURATION

Figure 212

EAPOL frame format

■

PAE Ethernet type: Protocol type. It takes the value 0x888E.

■

Protocol version: Version of the EAPOL protocol supported by the EAPOL frame
sender.

■

Type: Type of the EAPOL frame. Table 57 shows the defined types of EAPOL
frames.

■

Length: Length of the data, that is, length of the Packet body field, in bytes. If
the value of this field is 0, no subsequent data field is present.

■

Packet body: Content of the packet. The format of this field varies with the
value of the Type field.

EAP Packet Format

An EAPOL frame of the type of EAP-Packet carries an EAP packet in its Packet
body field. The format of the EAP packet is shown in Figure 213.

Table 57

Types of EAPOL frames

Type Description

EAP-Packet (a value of 0x00)

Frame for carrying authentication information,
present between an authenticator system and
the authentication server.

A frame of this type is repackaged and
transferred by RADIUS to get through complex
networks to reach the authentication server.

EAPOL-Start (a value of 0x01)

Frame for initiating authentication, present
between a supplicant and an authenticator.

EAPOL-Logoff (a value of 0x02)

Frame for logoff request, present between a
supplicant and an authenticator.

EAPOL-Key (a value of 0x03)

Frame for carrying key information, present
between a supplicant and an authenticator.

EAPOL-Encapsulated-ASF-Alert (a value of
0x04)

Frame for carrying alerting information compliant
to Alert Standard Forum (ASF).

A frame of this type carries network
management-related information like warning
messages and is terminated at the authenticator.

PAE Ethernet type

Packet body

Type

Protocol version

Length

Summary of Contents for 4800G Series































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 4800G Series

Reviews:

Related manuals for 4800G Series

Brands by name

Popular brands

3Com 4800G Series, Configuration Manual

Search results

Summary of Contents for 4800G Series

Reviews:

Related manuals for 4800G Series

Brands by name

Popular brands