936
C
HAPTER
75: SNMP C
ONFIGURATION
■
The size of SNMP logs cannot exceed that allowed by the information center
and the sum of the node, and value field of each log information cannot
exceed 1K bytes; otherwise, the exceeded part will be output.
■
For the detailed description of system information, the information center and
the
info-center source
command, refer to “Configuring Information Center”
on page 1009.
Trap Configuration
SNMP Agent sends Traps to NMS to alert the latter of critical and important events
(such as restart of the managed device).
Configuration
Prerequisites
Basic SNMP configurations have been completed. These configurations include
version configuration: community name is needed when SNMPv1 and v2c are
adopted; username and MIB view are needed if SNMPv3 is adopted.
Configuration Procedure
Enabling Trap transmission
Follow these steps to enable Trap transmission:
c
CAUTION:
To enable an interface to send SNMP Traps when its state changes, you
need to enable the Link up/down Trap packet transmission function on an
interface and globally. Use the
enable snmp trap updown
command to enable
this function on an interface, and use the
snmp-agent trap enable
[
standard
[
linkdown
|
linkup
] * ] command to enable this function globally.
Configuring Trap transmission parameters
Follow these steps to configure Trap:
To do…
Use the command…
Remarks
Enter system view
system-view
-
Set to enable the device to
send Traps globally
snmp-agent trap enable
[
bgp
|
configuration
|
flash
|
ospf
[
process-id
]
[
ospf-trap-list
] |
standard
[
authentication
|
coldstart
|
linkdown
|
linkup
|
warmstart
]* |
system
|
voice
|
vrrp
[
authfailure
|
newmaster
] ]
Optional
All types of Traps are allowed
by default.
Enter interface view
interface
interface-type
interface-number
-
Set to enable the device to
send Traps of interface state
change
enable snmp trap updown
Optional
Transmission of Traps of
interface state change is
allowed by default.
To do…
Use the command…
Remarks
Enter system view
system-view
-
Summary of Contents for 4800G Series
