3Com Switch 4500G Family
47
Command Reference
state
Use the
state
command to clarify the name of the state where an entity lies.
PKI Entity view
step
Use the
step
command to set a rule numbering step.
Basic IPv4 ACL view
Advanced IPv4 ACL view
Ethernet Frame Header ACL view
stop-accounting-buffer enable
Use the
stop-accounting-buffer enable
command to enable the switch to buffer the stop-accounting
requests that bring no response.
RADIUS Scheme view
stop-accounting-buffer enable
Use the
stop-accounting-buffer enable
command to enable the switch to buffer the stop-accounting
requests that bring no response.
Scheme view
stp
Use the
stp
command to enable or disable the MSTP feature globally or for a port or a group of ports.
System view
Ethernet Port view
Port Group view
stp bpdu-protection
Use the
stp bpdu-protection
command to enable the BPDU protection function.
System view
stp bridge-diameter
Use the
stp bridge-diameter
command to set the network diameter of a switched network, which is
represented in terms of the maximum number of switches between any two terminals in a switched network.
System view
stp compliance
Use the
stp compliance
command to configure the MSTP packet format for a port or a group of ports
Ethernet Port view
Port Group view
stp cost
Use the
stp cost
command to set the path cost of a port or a group or ports in the specified MST instance.
Ethernet Port view
Port Group view
stp edged-port
Use the
stp edged-port
command to configure the current Ethernet port as either an edge port or a
non-edge port.
Ethernet Port view
Port Group view
stp loop-protection
Use the
stp loop-protection
command to enable the loop guard function for a port or a group of ports.
Ethernet Port view
Port Group view
stp max-hops
Use the
stp max-hops
command to set the maximum hop count of the MST region to which the switch
belongs.
System view
stp mcheck
Use the
stp mcheck
command to carry out the mCheck operation globally or on a port.
Ethernet Port view
System view
stp mode
Use the
stp mode
command to set the MSTP operation mode of the switch.
System view
stp pathcost-standard
Use the
stp pathcost-standard
command to set the standard used for calculating the default path costs
of ports.
System view
