26
3Com Switch 4500G Family
Command Reference
igmp-snooping querier
Use the
igmp-snooping querier
command to enable the IGMP Snooping querier.
VLAN view
igmp-snooping query-interval
Use the
igmp-snooping query-interval
command to configure the interval of sending IGMP general
queries.
VLAN view
igmp-snooping report-aggregation
Use the
igmp-snooping report-aggregation
command to enable IGMP report suppression.
IGMP Snooping view
igmp-snooping router-aging-time
Use the
igmp-snooping router-aging-time
command to configure the aging time of router ports in the
current VLAN.
VLAN view
igmp-snooping source-deny
Use the
igmp-snooping source-deny
command to enable multicast source port filtering.
Ethernet Port view
Port Group view
igmp-snooping special-query source-ip
Use the
igmp-snooping special-query source-ip
command to configure the source IP address of IGMP
group-specific queries.
VLAN view
igmp-snooping static-group
Use the i
gmp-snooping static-group
command to enable the static member port function, namely to
configure a port or ports as static member port(s) of a multicast group or multicast source/group.
Ethernet Port view
Port Group view
igmp-snooping static-router-port
Use the
igmp-snooping static-router-port
command to enable the static router port function.
Ethernet Port view
Port Group view
igmp-snooping version
Use the
igmp-snooping version
command to configure the IGMP Snooping version.
VLAN view
import-route
Use the
import-route
command to import routes and set route attributes. You can set the routing policy to
import specified routes.
RIP view
import-route
info-center channel name
Use the
info-center channel name
command to name the channel of the specified number.
System view
info-center console channel
Use the
info-center console channel
command to specify the channel to output system information to
the console.
System view
info-center enable
Use the
info-center enable
command to enable the information center.
System view
info-center logbuffer
Use the
info-center logbuffer
command to enable information output to the log buffer through the
specified channel (you can also set the size of the log buffer in this command).
System view
info-center loghost
Use the
info-center loghost
command to specify a log host and to configure the related parameters.
System view
info-center loghost source
Use the
info-center loghost source
command to configure the source interface through to output log
information to the log host.
System view
