manualshive.com logo in svg

3Com 4500G 3C17772-91, Quick Reference Manual

Share
Download
3Com 4500G 3C17772-91 Quick Reference Manual Download Page 33

3Com Switch 4500G Family

 

33

 

Command Reference

ntdp timer port-delay

Use the 

ntdp timer port-delay 

command to set the delay time for a switch to forward a received 

topology-collection request packet through its successive ports.

System view

ntp-service access

Use the 

ntp-service access 

command to set the authority to access the local equipment.

System view

ntp-service authentication enable

Use the

 ntp-service authentication enable 

command to enable the NTP-service authentication.

System view

ntp-service authentication-keyid

Use the 

ntp-service authentication-keyid

 command to configure an NTP authentication key.

System view

ntp-service broadcast-client

Use the 

ntp-service broadcast-client

 command to configure an Ethernet switch to operate in NTP 

broadcast client mode.

VLAN Interface view

ntp-service broadcast-server

Use the 

ntp-service broadcast-server

 command to configure the device to work in the NTP broadcast 

server mode.

VLAN Interface view

ntp-service in-interface disable

Use the 

ntp-service in-interface disable

 command to disable an interface to receive NTP message.

VLAN Interface view

ntp-service max-dynamic sessions

Use the 

ntp-service max-dynamic-sessions 

command to set the maximum number of dynamic NTP 

sessions.

System view

ntp-service multicast-client

Use the 

ntp-service multicast-client 

command to configure the device to work in the NTP multicast 

client mode.

VLAN Interface view

ntp-service multicast-server

Use the 

ntp-service multicast-server 

command to configure an Ethernet switch to operate in NTP 

multicast server mode.

VLAN Interface view

ntp-service reliable authentication-keyid

Use the 

ntp-service reliable authentication-keyid

 command to specify that the created 

authentication key is a trusted key. When NTP authentication enabled, a client can be synchronized only to 
a server that can provide a trusted authentication key.

System view

ntp-service source-interface

Use the 

ntp-service source-interface 

command to designate an interface to transmit NTP message.

System view

ntp-service unicast-peer

Use the 

ntp-service unicast-peer

 command to designate a symmetric-passive peer for the device.

System view

ntp-service unicast-server

Use the 

ntp-service unicast-server 

command to designate an NTP server for the device.

System view

open

Use the 

open

 command to log onto the IPv4 FTP server under the FTP client view.

FTP Client view

organization

Use the 

organization

 command to specify the name of the organization to which the entity belongs.

PKI Entity view

Summary of Contents for 4500G 3C17772-91





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands