manualshive.com logo in svg

3Com 4500G 3C17772-91, Quick Reference Manual

Share
Download
3Com 4500G 3C17772-91 Quick Reference Manual Download Page 40

40

3Com Switch 4500G Family

 

Command Reference

reset qos vlan-policy

Use the

 reset qos vlan-policy

 command to clear QoS policy statistics on VLAN(s).

User view

reset radius statistics

Use the 

reset radius statistics command 

to clear the statistics about the RADIUS protocol.

User view

reset recycle-bin

Use the 

reset recycle-bin

 command to completely delete file(s) in the recycle bin in the Flash.

User view

reset rip statistics

Use the 

reset rip statistics

 command to clear the statistics information in specified RIP process.

User view

reset saved-configuration

Use the 

reset saved-configuration

 command to erase the startup configuration file.

User view

reset stop-accounting-buffer

Use the 

reset stop-accounting-buffer 

command to delete the buffered no-response stop-accounting 

request packets.

User view

reset stop-accounting-buffer

Use the 

reset stop-accounting-buffer 

command to clear the stop-accounting requests that have no 

response and are buffered on the switch.

User view

reset stp

Use the 

reset stp

 command to clear the MSTP statistics of specified Ethernet ports.

User view

reset tcp statistics

Use the 

reset tcp statistics 

command to clear the TCP statistics information.

User view

reset trapbuffer

Use the 

reset trapbuffer

 command to reset the trap buffer contents.

User view

reset udp-helper packet

Use the 

reset udp-helper packet

 command to clear statistics about the packets forwarded.

User view

reset udp statistics

Use the 

reset udp statistics

 command to clear the UDP statistics information.

User view

reset unused porttag

User the command 

reset unused porttag 

to clear the unused 16-bit interface index in the current system

User view

restore startup-configuration

Use the 

restore startup-configuration 

command to download a configuration file from the specified 

TFTP server and set it as the configuration file for next startup.

User view

retry

Use the 

retry command

 to set the maximum number of transmission attempts of RADIUS requests.

RADIUS Scheme view

retry realtime-accounting

Use the 

retry realtime-accounting

 command to set the maximum number of real-time accounting 

request attempts.

RADIUS Scheme view

retry stop-accounting

Use the 

retry stop-accounting

 command to set the maximum number of transmission attempts of the 

stop-accounting requests buffered due to no response.

RADIUS Scheme view

Summary of Contents for 4500G 3C17772-91





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands