3Com 4500G 3C17772-91, Quick Reference Manual

Page: 36 / 52

36 3Com Switch 4500G Family
Command Reference
port-group
Use the
port-group manual
command to enter a specified manual port group view. If the manual port group
does not exist, create it before entering its view.
Use the
port-group aggregation
command to enter a port group aggregation view.
System view
port-group aggregation
Use the
port-group aggregation
command to enter aggregation port group view.
System view
port hybrid pvid vlan
Use the
port hybrid pvid vlan
command to configure the default VLAN ID of the hybrid port.
Ethernet Port view
Port Group view
port hybrid vlan
Use the
port hybrid vlan
command to add the current Hybrid port to the specified VLAN(s).
Ethernet Port view
Port Group view
port-isolate enable
Use the
port isolate
command to add an Ethernet port to the isolation group.
Ethernet Port view
Port Group view
port link-aggregation group
Use the
port link-aggregation group
agg_id
command to assign the Ethernet port to the specified link
aggregation group (manual or static LACP).
Ethernet Interface view
port trunk permit vlan
Use the
port trunk permit vlan
command to add a trunk port to one VLAN, a selection of VLANs, or all
VLANs.
Ethernet Port view
Port Group view
port trunk pvid vlan
Use the
port trunk pvid vlan
command to configure the default VLAN ID for a trunk port.
Ethernet Port view
Port Group view
prefer-cipher
Use the
prefer-cipher
command to configure the preferred cipher suite for SSL client policy.
SSL Client Policy view
preference
Use the
preference
command to define the route priority.
RIP view
preference
primary accounting
Use the
primary accounting
command to set the IP address and port number of the primary RADIUS
accounting server.
RADIUS Scheme view
primary accounting
Use the
primary accounting
command to configure a primary accounting server.
Scheme view
primary authentication
Use the
primary authentication
command to set the IP address and port number of the primary RADIUS
authentication/authorization server.
RADIUS Scheme view
primary authentication
Use the
primary authentication
command to configure a primary authentication server.
Server Group view
primary authorization
Use the
primary authorization
command to configure a primary authorization server.
Scheme view