manualshive.com logo in svg

3Com 4500G 3C17772-91, Quick Reference Manual

Share
Download
3Com 4500G 3C17772-91 Quick Reference Manual Download Page 34

34

3Com Switch 4500G Family

 

Command Reference

organizational-unit

Use the 

organizational-unit

 command to specify the name of the organization unit to which this entity 

belongs.

PKI Entity view

overflow-replace

Use the 

overflow-replace 

command to enable the multicast group replacement function globally.

IGMP Snooping view

parity

Use the 

parity

 command to set the check mode of the user interface.

AUX User Interface view only

passive

Use the 

passive 

command to set the data transmission mode to passive mode.

FTP Client view

  

password

Use the 

password

 command to set a password for the local user.

Local User view

password

Use the 

password

 command to configure a password used to log in to the FTP server.

NQA Test Group view

peer

Use the 

peer

 command to define IP addresses of RIP neighboring routers in the NBMA (Non-Broadcast 

Multi-Access) network. After configuring this command, updating messages are unicast to the peer rather 
than multicast or broadcast.

RIP view

peer-public-key end

Use the 

peer-public-key end

 command to return to system view from public key view.

Public Key view

ping

Use the 

ping

 command to check the IP network connection and the reachability of the host.

Any view 

  

pki certificate access-control-policy

Use the 

pki certificate access-control-policy

 command to create a certificate attribute access 

control policy.

System view

pki certificate attribute-group

Use the 

pki certificate attribute-group

 command to create a certificate attribute group. This 

command also leads you to certificate attribute group view.

System view

pki delete-certificate

Use the 

pki delete-certificate

 command to delete the locally stored certificates.

System view

pki-domain

Use the 

pki-domain

 command to configure the PKI domain to which an SSL server policy or SSL client 

policy belongs.

SSL Server Policy view

SSL Client Policy view

pki domain

Use the

 pki domain 

command to enter PKI domain view, and configure the parameters of LDAP server 

and for certificate request and authentication.

System view

pki entity

Use the 

pki entity

 command to name a PKI entity and enter PKI entity view.

System view

pki import-certificate

Use the 

pki import-certificate

 command to import an existing CA certificate or local certificate.

System view

Summary of Contents for 4500G 3C17772-91





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands