46
3Com Switch 4500G Family
Command Reference
ssh client first-time enable
Use the
ssh client first-time enable
command to configure the client to run the initial authentication.
System view
ssh client source
Use the
ssh client source
command to specify the source IP address or source interface of the SSH
client.
System view
ssh server authentication-retries
Use the
ssh server authentication-retries
command to set the maximum number of SSH connection
authentication attempts, which is validated at next login.
System view
ssh server authentication time-out
Use the
ssh server authentication-timeout
command to set the SSH user authentication timeout period
on the SSH server.
System view
ssh server compatible-ssh1x enable
Use the
ssh server compatible-ssh1x
command to enable the SSH server to work with SSH1.x clients.
System view
ssh server enable
Use the
ssh server enable
command to enable SSH server.
System view
ssh server rekey-interval
Use the
ssh server rekey-interval
command to set the interval for updating the server key pair.
System view
ssh user assign rsa-key
Use the
ssh user assign rsa-key
command to assign an existing public key to a user. If the user does
not exist, the command creates the user with the authentication method of RSA and the default service type
of stelnet at first.
System view
ssh user authentication-type
Use the
ssh user authentication-type
command to specify the authentication method for an SSH user.
If the specified user does not exist, the command creates the user with the default service type of stelnet at
first.
System view
ssh user service-type
Use the
ssh user service-type
command to specify service type for a user.
System view
ssh2
Use the
ssh2
command to enable the connection between SSH client and server, define key exchange
algorithm preference, encryption algorithm preference and HMAC algorithm preference on the server and
client.
System view
ssl client-policy
Use the
ssl client-policy
command to create an SSL policy and enter its view.
System view
ssl server-policy
Use the
ssl server-policy
command to create an SSL server policy and enter its view.
System view
startup saved-configuration
Use the s
tartup saved-configuration
command to specify a main configuration file for next startup. The
specified file must be ended with a .cfg extension and saved in the root directory of the storage device.
User view
state
Use the
state
command to configure the state of the current ISP domain/current user.
ISP Domain view
Local User view
state
Use the
state
command to set the status of a RADIUS server.
RADIUS Scheme view
