3Com 3CRWX120695A, Configuration Manual

Page: 100 / 728

100 C
HAPTER
5: C
ONFIGURING AND
M
ANAGING
P
ORTS AND
VLAN
S
Port and VLAN
Configuration
Scenario
This scenario assigns names to ports, and configures MAP access ports,
wired authentication ports, a load-sharing port group, and VLANs.
1 Assign names to ports to identify their functions, and verify the
configuration change. Type the following commands:
WX1200# set port 1 name mgmt
success: change accepted.
WX1200#
set port 2 name finance
success: change accepted.
WX1200#
set port 3 name accounting
success: change accepted.
WX1200#
set port 4 name shipping
success: change accepted.
WX1200#
set port 5-6 name lobby
success: change accepted.
WX1200#
set port 7-8 name conf_room1
success: change accepted.
WX1200#
display port status
Port Name Admin Oper Config Actual Type Media
===============================================================================
1 mgmt up up auto 100/full network 10/100BaseTx
2 finance up down auto network 10/100BaseTx
3 accounting up down auto network 10/100BaseTx
4 shipping up down auto network 10/100BaseTx
5 lobby up down auto network 10/100BaseTx
6 lobby up down auto network 10/100BaseTx
7 conf_room1 up down auto network 10/100BaseTx
8 conf_room1 up down auto network 10/100BaseTx
2 Configure the country code for operation in the US and verify the
configuration change. Type the following commands:
WX1200# set system countrycode US
success: change accepted.
WX1200#
display system
===============================================================================
Product Name:
WX1200
System Name: WX1200
System Countrycode: US
System Location:
System Contact:
System IP: 0.0.0.0
System idle timeout: 3600
System MAC: 00:0B:0E:00:04:0C