manualshive.com logo in svg

3Com 3CRWER101A-75, User Manual, Page: 72 / 124

Share
Download
3Com 3CRWER101A-75 User Manual Download Page 72

70

C

HAPTER

 5: C

ONFIGURING

 

THE

 R

OUTER

Maintenance

These screens allow you to manage different parameters of the Router 
and perform certain administrative functions. 

Configuration Tools

Use this configuration screen to backup, restore or reset the 
configuration details of the Router. 

Figure 49   

Configuration Tools Screen

■

Backup Wireless Router Configuration — You can save your current 
configuration by clicking the 

Backup Wireless Router Configuration

 

button. Saving your configuration will allow you to restore it later if 
your settings are lost or changed. It is recommended that you backup 
your current configuration before performing a firmware update.

■

Restore from saved Configuration file (backup.bin) — The restore 
option will allow you to restore a previously saved configuration. 
Check the 

Restore from saved Configuration file

 radio button and 

click 

NEXT

 to restore the saved backup configuration file.

■

Restore Wireless Router to Factory Defaults — Using this option will 
reset all of the settings in the Router to the factory default settings. It 
is recommended that you backup your settings before you restore all 
of the defaults. To restore the factory default settings, check 

Restore 

Wireless Router to Factory Defaults

 and click 

NEXT

. You will be asked 

to confirm your decision.

Summary of Contents for 3CRWER101A-75





























































































































Reviews:

No comments