LAN Settings
67
Heart Beat Signal
Check with your ISP to make sure they support Heart Beat Signal.
To set up the Router for use with a
Heart Beat Signal
connection, use the
following procedure:
1
Select
Heart Beat Signal (For Australia only)
in the
IP Allocation Mode
field.
2
Enter the
Host Name
(optional).
Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the
Host Name
text box.
3
Enter your Heart Beat Signal user name in the
Heart Beat Signal User
Name
text box.
4
Enter your
Heart Beat Signal password
in the
Heart Beat Signal Password
text box.
5
Enter the
MTU
value supplied by your ISP. If you do not know this, leave it
at the default value. The default is 1440.
6
Select an idle time from the
Maximum
Idle Time drop-down list.
This value will correspond to the amount of idle time(no Internet activity)
!
that will pass before the Router automatically ends your PPTP session.
Check all of your settings, and then click
Save
.
