3Com 3CRWER100-75 - OfficeConnect Wireless 54 Mbps 11g Cable/DSL Router User Manual Download Page 124 | Manualshive

Page: 124 / 128

background image

140

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by tuning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following measures:

■

Reorient or relocate the receiving antenna

■

Increase the distance between the equipment and the receiver

■

Connect the equipment to outlet on a circuit different from that to which the receiver is
connect

■

Consultthe dealer or an experienced radio/TV technician for help

The user may find the following booklet prepared by the Federal Communications Commission
helpful:

The Interference Handbook

This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock
No.004-000-0034504.

3Com is not responsible for any radio or television interference caused by unauthorized modification
of the devices included with this 3Com OfficeConnect Wireless 54Mbps/108Mbps 11g
Cable/DSL Router (WL-537, WL-537S), or the substitution or attachment of connecting cables
and equipment other than specified by 3Com.

The correction of interference caused by such unauthorized modification, substitution or
attachment will be the responsibility of the user.

USA-F

EDERAL

C

OMMUNICATIONS

C

OMMISSION (FCC)

«
...
122
123
124
125
126
...
»

Summary of Contents for 3CRWER100-75 - OfficeConnect Wireless 54 Mbps 11g Cable/DSL Router

































































































































Reviews:

No comments

Related manuals for 3CRWER100-75 - OfficeConnect Wireless 54 Mbps 11g Cable/DSL Router

DES-3526 - Switch - Stackable

Brand: D-Link Pages: 258

Brand: D-Link Pages: 4

Brand: D-Link Pages: 2

Brand: D-Link Pages: 9

Brand: D-Link Pages: 8

Brand: D-Link Pages: 3

Brand: D-Link Pages: 28

Brand: D-Link Pages: 2

DSL-2540B - ADSL2/2+ Modem With EN Router

Brand: D-Link Pages: 12

Brand: D-Link Pages: 62

QSR-3920 Series

Brand: QTech Pages: 120

Brand: Quantum Pages: 20

AT-9424Ts/XP AC

Brand: Allied Telesis Pages: 3

LoadMaster 1500

Brand: KEMP Technologies Pages: 71

Brand: Maipu Pages: 80

Brand: Tripp Lite Pages: 34

24-Port 1000BASE-T

Brand: Comet Labs Pages: 44

Brand: NETGEAR Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands