Accessing the Wizard
35
Do not enter anything in this box if your ISP does not require a service
name.
4
Enter the MTU value supplied by your ISP in the
MTU
text box. If your ISP
has not supplied an MTU value, leave this at the default value. The
default is 1454.
5
Select an idle time from the
Maximum Idle Time
drop down list. This is
the amount of time without Internet activity that you want to allow
before the Router ends the PPPoE session.
6
Check all of your settings, and then click
Next
.
Dynamic IP Address Mode
To setup the Router for use with a dynamic IP address connection:
1
Select the
ISP provides configuration dynamically (via DHCP)
and then
click
Next
.
Figure 18
Hostname Screen
2
Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the
Host Name
text box (
Figure 18
) and click
Next
. The
Clone MAC Address screen displays.
Figure 19
Clone MAC Address Screen
