Accessing the Wizard
37
PPTP Mode
Figure 21
PPTP Mode Screen
To setup the Router for use with a PPTP connection, use the following
procedure:
1
Enter your PPTP server address in the
PPTP Server Address
text box.
2
Enter your PPTP user name in the
PPTP User Name
text box.
3
Enter your PPTP password in the
PPTP Password
text box.
4
Enter your
Primary DNS Address
and
Secondary DNS address
.
Your ISP may provide you with primary and secondary DNS addresses. If
they have been provided, enter the addresses in the appropriate text
boxes. If not, leave
0.0.0.0
in the boxes.
5
Enter the value supplied by your ISP in the
MTU
text box. If your ISP has
not supplied an MTU value, leave this at the default value. The default is
1460.
6
Select an idle time from the
Maximum Idle Time
drop-down list. This is
the amount of time without Internet activity that you want to allow
before the Router ends the PPTP session.
7
Check all of your settings, and then click
Next
.
Figure 22
displays.
