background image

70

C

HAPTER

 5: R

OUTER

 C

ONFIGURATION

Special Applications

Special Applications Screen

Select 

Special Apps

 tab to display 

Authorized Application

 setup screen. 

Some software applications require special or multiple connections to the 
Internet and these would normally be blocked by the firewall. For 
example Internet Telephony or Video conferences require multiple 
connections.

So that these special applications can work properly and are not blocked, 
the firewall needs to be told about them. In each instance there will be a 
trigger port and incoming port(s), where traffic on the trigger port tells 
the firewall to open the incoming ports.

Each defined Special Application only supports a single computer user, 
and up to 10 Special Applications can be defined. Any incoming ports 
opened by a Special Application trigger will be closed after five minutes 
of inactivity.

Special Application

 allows the router to keep track of outgoing data for 

specific port numbers. The router remembers which computer sends out 
what data, so when the requested data returns through the router, the 
data is sent back to the proper computer by way of IP address and port 
mapping rules.

Click 

Save 

to save the setting.

Summary of Contents for 3CRWER100-75 - OfficeConnect Wireless 54 Mbps 11g Cable/DSL Router

































































































































Reviews: