3Com Corporation
Page 55
STP
Set STP (Spanning Tree Protocol) parameters. Click the radio box button
On
to
enable or button
OFF
to disable the STP function.
If
ON
Status is enabled, you will then need setup the
Forward Delay
,
Hello Time
,
Max Age
and
Priority
for this device.
Figure 36
– STP settings Page
Forward Delay
– is the time intervals (in seconds) in which all devices transmit a
configuration message when this device becomes the root.
Hello Time
–is the time interval (in seconds) in which this device transmits a
configuration message.
Max Age
–is the maximum time (in seconds) this device can wait without receiving
a configuration message before attempting to reconfigure.
Priority
–is the priority of this device. It is a part of the bridge ID, which equal to
Priority (2 bytes) plus bridge MAC address (6 bytes).
Summary of Contents for 3CRWE920G73
Page 2: ......
