3Com Corporation
Page 44
Before changing radio settings manually, verify that these settings comply with
government regulations. At all times, it is the responsibility of the end-user to
ensure that the installation complies with local radio regulations. Refer to the
appendix, Regulatory Domain section.
Broadcast SSID
– when selected, your bridge’s SSID is visible in the networks list
while scanning the available networks for wireless client. When unselected, the
bridge’s SSID is not visible in the available network list.
Domain Max Output Power
– Shows the maximum output power of this bridge in
this domain, read only.
Cancel
– restore all previous values.
Apply
– save changed configuration.
Figure 26
– Wireless Setup Advanced
Basic Rate Set (Mbps)
– select the checkbox to set the Basic data rates at which
the station may transmit and receive data.
Beacon Period (milliseconds)
– this setting specifies the amount of time between
beacons in milliseconds. A beacon is a packet broadcast by the bridge to
synchronize the wireless network.
DTIM Period (count)
– this attribute specifies the number of beacon intervals that
elapse between transmissions of Beacon frames containing a TIM element whose
DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon
frames.
RTS Threshold (bytes)
– defines the maximum packet size beyond which the
Wireless Bridge invokes its RTS/CTS mechanism. Packets that exceed the
specified RTS threshold trigger the RTS/CTS mechanism. The NIC transmits
packets smaller than this threshold without using RTS/CTS [[0-2347] default: 2347
(2347 means that RTS is disabled)].
Summary of Contents for 3CRWE920G73
Page 2: ......
