3Com Corporation
Page 29
3
W
IRELESS
B
RIDGE CONFIGURATION
Initialization
The first login
During initial power up and first login, you will need to configure the basic
parameters of the bridge, such as the username, password and domain:
1. Connect a computer directly to the Bridge using standard Category 5 (CAT5)
UTP Ethernet cable.
2. Open a Web browser on the computer.
3. In
the
Address
or
Location
field: enter the IP address of a Bridge on the
network. For example if the IP address is 192.168.1.1, type:
http://192.168.1.1
to access the Web Manager.
4. Press
the
Enter
key, the
First Welcome
Screen appears:
Figure 7
– Welcome Page
5. Set
the
administrator name
,
password
,
Country
,
and for the indoor bridge,
Antenna
and
Cable
selection. Next, press the
Change
button.
This will set the new administrator name and password.
NOTE:
The Web pages are best viewed at 1024x768.
Summary of Contents for 3CRWE920G73
Page 2: ......
