3Com Corporation
Page 42
DHCP Server
If you want to use the internal DHCP server, first go to the
Internet Settings IP
Setup
page to set the IP address to
Static
. It is strongly recommended that IP
address setting is in the range of the DHCP server.
Figure 24
– DHCP Server Setup Page
Click the button
On
to enable the DHCP server.
IP Pool Start Address
– the first IP address in the range of addresses that you
want to assign.
IP Pool Start Address
– the last IP address in the range of addresses that you
want to assign.
Lease Time
– the timeframe in which DHCP client can use the IP address. When
lease time is expired, the client must request a DHCP IP address again.
Verify Address
– probes the network for conflicting IP addresses before giving a
suggested IP address to the requesting DHCP client.
Summary of Contents for 3CRWE920G73
Page 2: ......
