![background image](http://html1.mh-extra.com/html/3com/3crwe51196-officeconnect-wireless-cable-dsl/3crwe51196-officeconnect-wireless-cable-dsl_user-manual_3099147013.webp)
Rear Panel
13
Rear Panel
The rear panel (Figure 4) of the Gateway contains four LAN ports, one Ethernet
Cable/DSL port, and a power adapter socket.
Figure 4
Cable/DSL Gateway - Rear Panel
6 Wireless Antennae
The antennae on the product should be placed in a ‘V’ position when initially
installed.
7 Power Adapter Socket
Only use the power adapter supplied with this Gateway. Do not use any other
adapter.
8 Ethernet Cable/DSL port
Use the supplied patch cable to connect the Gateway to the Ethernet port on
your cable or DSL modem. The port will automatically adjust to the correct
speed and duplex.
9 Four 10/100 LAN ports
Using suitable RJ-45 cable, you can connect your Gateway to a computer, or to
any other piece of equipment that has an Ethernet connection (for example, a
hub or a switch). The LAN ports are configured as MDIX, for connection to a
computer with a straight through RJ-45 cable.
Summary of Contents for 3CRWE51196 - OfficeConnect Wireless Cable/DSL...
